Tuesday 7 October 2014

Cagiva Mito Exhaust silencer back box repair ( shorter )



Repairing a Cagiva Mito End Can silencer

Cagiva Mito Exhaust silencer back box repair ( shorter )


Here is an alternate way of repairing an end can if the carbon-kevlar

 tube is not totally junked and replacing is not mandatory.

Cagiva Mito Exhaust silencer back box repair ( shorter )


The part of the damaged tube must be removed. I would still be

 comfortable if the rest of it is 20cm in length at least. Use a piece of

 thick sandpaper to mark your cutting line. Any metal saw will do the

 rest of the job.

Cagiva Mito Exhaust silencer back box repair ( shorter )


The same length should be removed from the perforated pipe.


Cagiva Mito Exhaust silencer back box repair ( shorter )


And then welded back in again if necessary.


Cagiva Mito Exhaust silencer back box repair ( shorter )










No comments:

Post a Comment

No spam