Friday, 16 August 2013

CAGIVA MITO 125 MIKUNI TM35 35MM CARB JETTING / STRIP DOWN



cagiva mito 125 tm35 35mm strip down video added to basic maintenance post .







MIKUNI TM35MM

mito evo racing '95 original settings mikuni tm35:

throttle slide 5.5
jet-needle 6AEL4-60, 4th clip from below, 2th from top
pilot jet 45
main jet 310
air screw 1.5 turns from closed

mikuni tm35-1 'aftermarket' setting:

throttle slide 6.0
jet-needle 6EN11-53, 3th clip
pilot jet 20
main jet  350



 its always advisable after any change to do a plug chop test (see below) to test combustion conditions , this will give a clear indication of the jetting state , also its recommended to increase jets size 5 points for any sports airfilter or exhaust fitted again do the plug chop test to ensure correct running conditions 



-----------------------------------------------------------------------------------------
Mikuni tuning guide
Mikuni install guide
Mikuni performance guide
Mikuni carb manual


see more cagiva mito 125 posts here 



thanks for reading the Cagiva Mito 125 blog , if you would like to support us you can by  buying your Cagiva Mito 125 used parts   here on ebay uk   or buying  your new Cagiva Mito 125  here on Ebay UK  or for Cagiva Mito 125 accessories at Amazon uk here , or simply by donating  here .

BUY our ultimate Cagiva Mito 125 workshop manual bundle HERE 

You can also visit our sponsors website 125 sportsbikes and spares here .

No comments:

Post a Comment

Note: only a member of this blog may post a comment.