Friday, 26 July 2013

CAGIVA MITO 125 WILL NOT START , NON STARTER ISSUES (basics)





Spark/Compression/Fuel/Air/Timing



You need all the above to get the engine to run.

Remove the plug, reconnect it to the HT lead, hold it on the cylinder whilst turning the engine over and you should see a spark.

Whilst plug is out do a compression test. use a decent compression gauge to do the test .
good compression is a must <90psi and bike would not start <100psi starting problems risk of siezure 120/130> good ,

Check fuel is fresh and getting to the carb (put some fuel in spark plug hole)

Check air filter is clean

spark problem - duff spark plug, cap, ht lead, coil - CDI , check timing .

Try the obvious first.

CLICK HERE for the Motorcycle Medic Free Online Motorcycle Diagnostics

its all easy stuff really !!


See also Cagiva Mito Troubleshooting Guide here 

see more cagiva mito 125 posts here 



thanks for reading the Cagiva Mito 125 blog , if you would like to support us you can by  buying your Cagiva Mito 125 used parts   here on ebay uk   or buying  your new Cagiva Mito 125  here on Ebay UK  or for Cagiva Mito 125 accessories at Amazon uk here , or simply by donating  here .

BUY our ultimate Cagiva Mito 125 workshop manual bundle HERE 

You can also visit our sponsors website 125 sportsbikes and spares here .




No comments:

Post a Comment

Note: only a member of this blog may post a comment.