Saturday, 28 April 2012

CAGIVA MITO 125 CARB CLEANING / CARB SET UP / JETTING / IDLE SET UP

CAGIVA  MITO  125 CARB CLEANING / CARB SET UP / JETTING / IDLE SET UP 

CAGIVA MITO BLOG INDEX ( CLICK FOR MORE POSTS ON THE CAGIVA MITO 125 )


cagiva mito blog carb 28mm

Cagiva Mito 125 Dellorto 28mm for sale now 

Ebay uk click here 






cagiva mito race carb
mikuni carb tm35mm


                                            Rare to find the 35 tm's now try on ebay uk here 



Free Carb Manuals

dellorto carb manual

mikuni  carb manual 






Download the manual, read it. Stripping and cleaning carb is one of the easiest jobs to do on a 2stroke bike.
Meccano is harder to get to grips with than stripping and cleaning a carb. Don't let it scare you - it really is easy to do... otherwise, I'd suggest selling the bike and getting a 4T, as any regular maintenance that is a necessity for a 2stroke bike is gonna scare you, and you're gonna end up forking out hundreds in labour hours to the local bikeshop for tasks that really you should learn to do yourself.

Grey residue is likely result of water mixed with 2T oil saturating / flooding your spark plug as you have water in the float chamber that is submerging the mainjet (mainjet is in base of float bowl, and petrol floats on water), so when you open throttle, bike gets a lung full of water rather than fuel.
Flip up tank. Turn fuel off. Look down at carb. Either side of it you'll see 2x jubilee clips clamped over rubbers. Undo those. Grab carb... move it backwards and forwards and work it out from between the rubbers. Keeping it the right way up, undo big brass bolt in bottom. Bottom will then come off. This bottom part is the float bowl. Ideally, open the bolt over a glass bowl so that you catch the spilt fuel and can inspect it for signs of water or contamination.
If no signs of globules of liquid suspended in fuel, inspect the bottom of the carb that you removed for signs of contamination - dust, rust, dirt etc. Rinse it out.
The jets are small brass things with a hole in the middle and a flat-blade screwdriver cut - you'll see em. Take them out one at a time, blow thru them, rinse in boiling water. Put em back in again. Tighten em til they nip gently.
Put float bowl back on. Do up the big bolt to secure it in place. (Note, this big bolt has the mainjet fitted in the opposite end of it).
Fit carb back inbetween the rubbers. Put the jubilee clips back on. Turn on fuel tap.
See if it starts. See if problem still exists.






Cagiva Mito Evo Carb Tuning Kit click here to read more about this .










CARB SETUP
Set it to rev at 2000 with the idle screw, then twiddle the air screw just to the left of the idle screw... turn it all the way in, then back out 1.5 to 2.5 turns, listening to engine. As you turn it, revs should increase slightly. Set it to a point that revs are at highest and smoothest. Now use the idle screw to tune it back down to around 1100rpm ( i normally set mine at 1500rpm )... that should be the carb as set as it can be.

in = increase
out = decrease revs



cagiva  mito carb racing jetting
cagiva mito carb

cagiva mito carb jetting , 28mm carb
cagiva mito carb jets 

cagiva mito carb jets
cagiva mito carb jets


CAGIVA MITO BLOG INDEX ( CLICK FOR MORE POSTS ON THE CAGIVA MITO 125 )
----------------------------------------------------------------------------------------------------------------------

Type ....................... Dell'Orto PHBH 28 BD
Venturi Diameter ..............................mm 28
High Speed Jet . .................................. 100
Starter Jet . ............................................ 65
Low Speed Jet . ..................................... 55
Emulsifier ............................................... 55
Throttle Piston ............................... 44.59.00
Metering Pin . ........................................ X 4
Metering Pin position . ........................... 3rd
Main Nozzle . ................................. 270 BN
Float .................................................. g 9,5
Idle Mixture Adjusting Screw . ...... 1 and 1/2




Type ....................... Dell'Orto PHBH 28 BD
Venturi Diameter ..............................mm 28
High Speed Jet . .................................. 110
Starter Jet . ............................................ 65
Low Speed Jet . ..................................... 65
Emulsifier ............................................... B65
Throttle Piston ......................................... .45
Metering Pin . ........................................ X 4
Metering Pin position . ........................... 3rd
Main Nozzle . ................................. 270 BN
Float .................................................. g 9,5
Idle Mixture Adjusting Screw . .......... 1



Type ....................... Dell'Orto PHBH 28 BD (A-CH)
Venturi Diameter ..............................mm 28
High Speed Jet . .................................. 120
Starter Jet . ............................................ 65
Low Speed Jet . ..................................... 38
Power Jet............................................... 90
Low Emulsifier.......................................BF 1
Throttle Piston ...................................... .50
Metering Pin . ........................................ X 58
Metering Pin slot . ................................. 1st
Main Nozzle . ................................. 266 DU1
Float .................................................. g 9,5
Idle Mixture Adjusting Screw (turns). ...... 1/2

REGULATION OF IDLE
This regulation must always be
carried out with warm engine
and throttle closed.
Operate as follows:
- remove the right or left-side
fairing according to
instructions on page 14;
- tighten adjusting screw (1) of
the fuel valve to obtain a high
speed rate (2,000 RPM; by
turning clockwise, the speed
increases, by reversing the
operation it decreases);
- tighten or loosen screw (2)
that adjusts mixture dosage
until getting regular engine
rotation;
- progressively loosen gas
valve adjusting screw (1) until
reaching 1,000 RPM.
- reassemble the side fairing.
At high speed fuel mixture
dosage is automatic, and
cannot be opened from the
outside. Should the engine run
irregularly, clean the

carburetor.

================================================================================

tm35 tm35mm carb mikuni
tm35mm carb cagiva mito 


mito evo racing '95 original settings mikuni tm35:

throttle slide 5.5
jet-needle 6AEL4-60, 4th clip from below, 2th from top
pilot jet 45
main jet 310
air screw 1.5 turns from closed

mikuni tm35-1 'aftermarket' setting:

throttle slide 6.0
jet-needle 6EN11-53, 3th clip
pilot jet 20
main jet 350

Cagiva mito 125 carb strip down videos ?




Mikuni tuning guide
Mikuni install guide
Mikuni performance guide

see more cagiva mito 125 posts here 



thanks for reading the Cagiva Mito 125 blog , if you would like to support us you can by  buying your Cagiva Mito 125 used parts   here on ebay uk   or buying  your new Cagiva Mito 125  here on Ebay UK  or for Cagiva Mito 125 accessories at Amazon uk here , or simply by donating  here .

BUY our ultimate Cagiva Mito 125 workshop manual bundle HERE 

You can also visit our sponsors website 125 sportsbikes and spares here .

No comments:

Post a Comment

Note: only a member of this blog may post a comment.